Pin năng lượng mặt trời Hanwha Q.PLUS G6+340-355

Pin năng lượng mặt trời Hanwha Q.MAXX 320-335
Tháng Tư 3, 2020
Pin năng lượng mặt trời Hanwha Q.PEAK DUO-G5+ 315-335
Tháng Tư 3, 2020
Xem tất cả

Pin năng lượng mặt trời Hanwha Q.PLUS G6+340-355

  • Nominal Power: 340 – 355 Wp
  • Efficiency: Up to 20.1 %
  • Maximum System Voltage: 1000
  • Wind/Snow Load: 4000 / 5400
  • Format: 1740 mm × 1030 mm × 32 mm
  • Weight: 19.9 kg
  • Warranty
    • At least 98 % of nominal power during first year. Thereafter max. 0.54 % degradation per year.
    • At least 93.1 % of nominal power up to 10 years. At least 85 % of nominal power up to 25 years.


Higher yield per surface area and lower BOS costs and Higher power classes and an efficiency rate of up to 19.5 %.
Q.ANTUM technology supercharges ordinary crystalline solar cells and modules. Unlike expensive high-end solar modules,

Q,ANTUM does not involve a complex new cell design. No special system components are required. Q.ANTUM delivers exceptional performance under real-world conditions.

No solar system sees direct sunlight every minute of every day.

Up to 19.5% 

Efficiency rate: The rear surfaces of Q.ANTUM solar cells are treated with a special nano coating that functions much like a typical household mirror. Rays of sunlight that would otherwise go to waste are reflected back through the cell to generate more electricity.


For solar cells and solar modules from Q CELLS, potential induced degradation (PID) doesn’t exist. Potential induced degradation can lead to a performance loss of 20 % or more, even in the first few months. Q CELLS´ proprietary Anti PID Technology will save you from this fate.

Solar cells with Hot-Spots can heat up to such a high temperature that parts of a module burn out. In the worst case scenario, a module can catch fire.

The Tra.Q™ code contains information about the place and date of production. This makes it possible to trace certain production conditions for each solar cell.


With Q CELLS high quality modules you are covered by a 12 year product warrantyand a 25 year linear performance guarantee².
The linear performance guarantee certifies that your Q CELLS module will produce at least 97 % of the minimal rated power output in the first year and a maximum reduction in output of 0.6 % p. a. thereafter. The guaranteed minimum power output after 25 years is 83 %


The return on your solar system depends on the efficiency and quality of your components such as your solar panels. This is a good reason to trust in the technology of Q CELLS. We rely on German engineering, intensive research and strict quality control for all our solar products. And: We provide tailored solutions. Only in that case we can develop a photovoltaic solution that guarantees the highest yields matching your individual needs.


Rooftop arrays on residential buildings
Rooftop arrays on commercial / industrial buildings

Chat với Vũ Phong Solar Protection Status