The LG NeON 2 ACe has a 15 mm distance between the DC module and the Microinverter. The distance mitigates any impact to performance and reliability by allowing sufficient air-flow for cooling.
The LG NeON 2 series modules are proven to produce high energy output from high-efficiency n-type cells enabling more flexible use of available roof space.
The LG NeON 2 ACe produces safe AC voltage and complies with NEC 2014 and 2017 standards.
Remote Monitoring and Management with Enphase Enlighten software, the LG NeON 2 ACe is easy to monitor and mange from any web connected device.
The LG NeON 2 ACe simplifies logistics by consolidating multiple PV system components into a single product SKU. Making it easier to order, store and transport.
Installation of the LG NeON 2 ACe is a two step process of lifting the inverter and connecting the cable without the need to install the inverter, reducing installation labor.
Cells
6 x 10
Cell vendor
LG
Cell type
Monocrystalline / N-type
Cell dimensions
161.7 x 161.7 mm / 6 inches
# of busbar
12 (Multi Wire Busbar)
Dimensions (L x W x H)
1686 x 1016 x 40 mm / 66.38 x 40 x 1.57 inch
Weight
19.0 kg / 41.88 lbs
Front Load
6000 Pa / 125 psf
Rear Load
5400 Pa / 113 psf
Cooling
Natural Convection – No Fans
Enclosure Environmental Rating
Outdoor – NEMA 250 type 6 (MIC)
Operating Ambient Temperature
-40 ~ +65 °C (-40 ~ +149 °F)
Storage Temperature
40 ~ +85 °C (-40 ~ +185°F)
Inverter Model (Utility Interactive)
Enphase IQ6+ Microinverter
Certifications (AC Module)
UL 1741, UL 1703
Certifications (Micro Inverter)
UL 1741 / IEEE 1547, UL 62109-1, FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 NO. 107.1-01
Module Fire Performance (UL1703)
Type 1 (UL1703)
Limited Product Warranty
12 years
Output Warranty of Pmax (DC) (Measurement Tolerance ± 3%)
Linear warranty**
*
1) 1st year: 98%, 2) After 1st year: 0.55% annual degradation, 3) 25 years: 84.8%
Maximum Power (Pmax)*
19.3
Module Efficiency
330
Power Tolerance (%)
0 ~ +3
*
STC (Standard Test Condition): Irradiance 1,000 W/m², Ambient Temperature 25 °C, AM 1.5 / The nameplate power output is measured and determined by LG Electronics at its sole and absolute discretion / The Typical change in module efficiency at 200W/m² in relation to 1000W/m2 is -2.0%
NOCT*
45 ± 3 °C
Pmax
-0.37%/°C
Voc
-0.27%/°C
Isc
0.03 %/°C
Peak Output Power (VA)
290
Max. Continuous Output Power (VA)
280
Nominal Voltage / Range (V)
240 / 211 ~ 264 | 208 / 183 ~ 229
Nominal Output Current (A)
1.17 | 1.35
Nominal Frequency / Range (Hz)
60.0 / 59.3~60.5
Power Factor / Adjustable
1 / 0.7leading…0.7lagging
CEC Weighted Efficiency (%)
97 | 96.5
Number of Maximum AC Modules
13 | 11
Max. Branch Circuit Over Current Protection (A)
20